When You Need More Than 12MHz
If the ET928 is your everyday 3-in-1 multitool, the ET120MPRO is your serious scope. With 10× the bandwidth and 10× the sampling rate, this is the device you reach for when chasing fast transients, debugging high-frequency circuits, or diagnosing modern automotive electronics.
Performance That Competes With Bench Instruments
At 120MHz bandwidth and 500 megasamples per second, the ET120MPRO is in the same tier as desktop scopes that cost $300–500 — in a device you can carry in a lab coat pocket. Rising times under 3 nanoseconds mean you won’t miss fast edges on PWM signals, switching regulators, or digital buses.
A Signal Generator You’ll Actually Use
Unlike scopes with token square-wave calibration outputs, the ET120MPRO packs a genuine function generator capable of sine and triangle wave output up to 100KHz and square waves up to 3MHz with fully adjustable duty cycle. Simulate sensor outputs, test filter circuits, or calibrate equipment without a second instrument on the bench.
Never Lose a Waveform Again
With room for 2,500 stored waveforms and thumbnail browsing, you can capture a week’s worth of fault events, compare before-and-after repairs, and document findings for client reports — all on-device.
Built to Survive the Job Site
The silicone-armored body absorbs drops and vibration. The 6-hour USB-rechargeable battery keeps you going through a full shift. At just 187 grams with 124×80×35mm dimensions, it disappears into any tool bag.
Reviews
There are no reviews yet.